Output

The top-level output key contains set of options instructing webpack on how and where it should output your bundles, assets and anything else you bundle or load with webpack.

output.auxiliaryComment

string object

When used in tandem with output.library and output.libraryTarget, this option allows users to insert comments within the export wrapper. To insert the same comment for each libraryTarget type, set auxiliaryComment to a string:

output: {
  library: "someLibName",
  libraryTarget: "umd",
  filename: "someLibName.js",
  auxiliaryComment: "Test Comment"
}

which will yield the following:

(function webpackUniversalModuleDefinition(root, factory) {
  // Test Comment
  if(typeof exports === 'object' && typeof module === 'object')
    module.exports = factory(require("lodash"));
  // Test Comment
  else if(typeof define === 'function' && define.amd)
    define(["lodash"], factory);
  // Test Comment
  else if(typeof exports === 'object')
    exports["someLibName"] = factory(require("lodash"));
  // Test Comment
  else
    root["someLibName"] = factory(root["_"]);
})(this, function(__WEBPACK_EXTERNAL_MODULE_1__) {
  // ...
});

For fine-grained control over each libraryTarget comment, pass an object:

auxiliaryComment: {
  root: "Root Comment",
  commonjs: "CommonJS Comment",
  commonjs2: "CommonJS2 Comment",
  amd: "AMD Comment"
}

output.chunkFilename

string

This option determines the name of non-entry chunk files. See output.filename option for details on the possible values.

Note that these filenames need to be generated at runtime to send the requests for chunks. Because of this, placeholders like [name] and [chunkhash] need to add a mapping from chunk id to placeholder value to the output bundle with the webpack runtime. This increases the size and may invalidate the bundle when placeholder value for any chunk changes.

By default [id].js is used or a value inferred from output.filename ([name] is replaced with [id] or [id]. is prepended).

output.chunkLoadTimeout

integer

Number of milliseconds before chunk request expires, defaults to 120 000. This option is supported since webpack 2.6.0.

output.crossOriginLoading

boolean string

Only used when target is web, which uses JSONP for loading on-demand chunks, by adding script tags.

Enable cross-origin loading of chunks. The following values are accepted...

crossOriginLoading: false - Disable cross-origin loading (default)

crossOriginLoading: "anonymous" - Enable cross-origin loading without credentials

crossOriginLoading: "use-credentials" - Enable cross-origin loading with credentials

output.devtoolFallbackModuleFilenameTemplate

string | function(info)

A fallback used when the template string or function above yields duplicates.

See output.devtoolModuleFilenameTemplate.

output.devtoolLineToLine

boolean | object

Avoid using this option as it is deprecated and will soon be removed.

Enables line to line mapping for all or some modules. This produces a simple source map where each line of the generated source is mapped to the same line of the original source. This is a performance optimization and should only be used if all input lines match generated lines.

Pass a boolean to enable or disable this feature for all modules (defaults to false). An object with test, include, exclude is also allowed. For example, to enable this feature for all javascript files within a certain directory:

devtoolLineToLine: { test: /\.js$/, include: 'src/utilities' }

output.devtoolModuleFilenameTemplate

string | function(info)

This option is only used when devtool uses an options which requires module names.

Customize the names used in each source map's sources array. This can be done by passing a template string or function. For example, when using devtool: 'eval', this is the default:

devtoolModuleFilenameTemplate: "webpack:///[resource-path]?[loaders]"

The following substitutions are available in template strings (via webpack's internal ModuleFilenameHelpers):

When using a function, the same options are available camel-cased via the info parameter:

devtoolModuleFilenameTemplate: info => {
  return `webpack:///${info.resourcePath}?${info.loaders}`
}

If multiple modules would result in the same name, output.devtoolFallbackModuleFilenameTemplate is used instead for these modules.

output.filename

string

This option determines the name of each output bundle. The bundle is written to the directory specified by the output.path option.

For a single entry point, this can be a static name.

filename: "bundle.js"

However, when creating multiple bundles via more than one entry point, code splitting, or various plugins, you should use one of the following substitutions to give each bundle a unique name...

Using entry name:

filename: "[name].bundle.js"

Using internal chunk id:

filename: "[id].bundle.js"

Using the unique hash generated for every build:

filename: "[name].[hash].bundle.js"

Using hashes based on each chunks' content:

filename: "[chunkhash].bundle.js"

Make sure to read the Caching guide for details. There are more steps involved than just setting this option.

Note this option is called filename but you are still allowed to use something like "js/[name]/bundle.js" to create a folder structure.

Note this options does not affect output files for on-demand-loaded chunks. For these files the output.chunkFilename option is used. It also doesn't affect files created by loaders. For these files see loader options.

The following substitutions are available in template strings (via webpack's internal TemplatedPathPlugin):

The lengths of [hash] and [chunkhash] can be specified using [hash:16] (defaults to 20). Alternatively, specify output.hashDigestLength to configure the length globally.

When using the ExtractTextWebpackPlugin, use [contenthash] to obtain a hash of the extracted file (neither [hash] nor [chunkhash] work).

output.hashDigest

The encoding to use when generating the hash, defaults to 'hex'. All encodings from Node.JS' hash.digest are supported.

output.hashDigestLength

The prefix length of the hash digest to use, defaults to 20.

output.hashFunction

The hashing algorithm to use, defaults to 'md5'. All functions from Node.JS' crypto.createHash are supported.

output.hashSalt

An optional salt to update the hash via Node.JS' hash.update.

output.hotUpdateChunkFilename

string

Customize the filenames of hot update chunks. See output.filename option for details on the possible values.

The only placeholders allowed here are [id] and [hash], the default being:

hotUpdateChunkFilename: "[id].[hash].hot-update.js"

Here is no need to change it.

output.hotUpdateFunction

function

Only used when target is web, which uses JSONP for loading hot updates.

A JSONP function used to asynchronously load hot-update chunks.

For details see output.jsonpFunction.

output.hotUpdateMainFilename

string

Customize the main hot update filename. See output.filename option for details on the possible values.

[hash] is the only available placeholder, the default being:

hotUpdateMainFilename: "[hash].hot-update.json"

Here is no need to change it.

output.jsonpFunction

string

Only used when target is web, which uses JSONP for loading on-demand chunks.

A JSONP function name used to asynchronously load chunks or join multiple initial chunks (CommonsChunkPlugin, AggressiveSplittingPlugin).

This needs to be changed if multiple webpack runtimes (from different compilation) are used on the same webpage.

If using the output.library option, the library name is automatically appended.

output.library

string

string or object (since webpack 3.1.0; for libraryTarget: "umd")

How the value of the output.library is used depends on the value of the output.libraryTarget option; please refer to that section for the complete details. Note that the default option for output.libraryTarget is var, so if the following configuration option is used:

output: {
  library: "MyLibrary"
}

The variable MyLibrary will be bound with the return value of your entry file, if the resulting output is included as a script tag in an HTML page.

Read the authoring libraries guide guide for more information on output.library as well as output.libraryTarget.

output.libraryExport

string or string[] (since webpack 3.0.0)

Default: _entry_return_

Configure which module or modules will be exposed via the libraryTarget.

The default value _entry_return_ is the namespace or default module returned by your entry file.

The examples below demonstrate the effect of this config when using libraryTarget: "var", but any target may be used.

The following configurations are supported:

libraryExport: "default" - The default export of your entry point will be assigned to the library target:

// if your entry has a default export of `MyDefaultModule`
var MyDefaultModule = _entry_return_.default;

libraryExport: "MyModule" - The specified module will be assigned to the library target:

var MyModule = _entry_return_.MyModule;

libraryExport: ["MyModule", "MySubModule"] - The array is interpreted as a path to a module to be assigned to the library target:

var MySubModule = _entry_return_.MyModule.MySubModule;

As the examples have shown that the return values of the entry points are bounded to those named variables, the usage of the resulting library is simply like so:

MyDefaultModule.doSomething();
MyModule.doSomething();
MySubModule.doSomething();

output.libraryTarget

string

Default: "var"

Configure how the library will be exposed. Any one of the following options can be used. Please note that this option works in conjunction with the value assigned to output.library. For the following examples, it is assumed that this value is configured as MyLibrary.

Note that _entry_return_ in the example code below is the value returned by the entry point. In the bundle itself, it is the output of the function that is generated by webpack from the entry point.

Expose a Variable

These options assign the return value of the entry point (e.g. whatever the entry point exported) to the name provided by output.library at whatever scope the bundle was included at.

libraryTarget: "var" - (default) When your library is loaded, the return value of your entry point will be assigned to a variable:

var MyLibrary = _entry_return_;

// In a separate script...
MyLibrary.doSomething();

When using this option, an empty output.library will result in no assignment.

libraryTarget: "assign" - This will generate an implied global which has the potential to reassign an existing value (use with caution).

MyLibrary = _entry_return_;

Be aware that if MyLibrary isn't defined earlier your library will be set in global scope.

When using this option, an empty output.library will result in a broken output bundle.

Expose Via Object Assignment

These options assign the return value of the entry point (e.g. whatever the entry point exported) to a specific object under the name defined by output.library.

If output.library is not assigned a non-empty string, the default behavior is that all properties returned by the entry point will be assigned to the object as defined for the particular output.libraryTarget, via the following code fragment:

(function(e, a) { for(var i in a) e[i] = a[i]; }(${output.libraryTarget}, _entry_return_)

Note that not setting a output.library will cause all properties returned by the entry point to be assigned to the given object; there are no checks against existing property names.

libraryTarget: "this" - The return value of your entry point will be assigned to this under the property named by output.library. The meaning of this is up to you:

this["MyLibrary"] = _entry_return_;

// In a separate script...
this.MyLibrary.doSomething();
MyLibrary.doSomething(); // if this is window

libraryTarget: "window" - The return value of your entry point will be assigned to the window object using the output.library value.

window["MyLibrary"] = _entry_return_;

window.MyLibrary.doSomething();

libraryTarget: "global" - The return value of your entry point will be assigned to the global object using the output.library value.

global["MyLibrary"] = _entry_return_;

global.MyLibrary.doSomething();

libraryTarget: "commonjs" - The return value of your entry point will be assigned to the exports object using the output.library value. As the name implies, this is used in CommonJS environments.

exports["MyLibrary"] = _entry_return_;

require("MyLibrary").doSomething();

Module Definition Systems

These options will result in a bundle that comes with a more complete header to ensure compatibility with various module systems. The output.library option will take on a different meaning under the following output.libraryTarget options.

libraryTarget: "commonjs2" - The return value of your entry point will be assigned to the module.exports. As the name implies, this is used in CommonJS environments:

module.exports = _entry_return_;

require("MyLibrary").doSomething();

Note that output.library is omitted, thus it is not required for this particular output.libraryTarget.

Wondering the difference between CommonJS and CommonJS2 is? While they are similar, there are some subtle differences between them that are not usually relevant in the context of webpack. (For further details, please read this issue.)

libraryTarget: "amd" - This will expose your library as an AMD module.

AMD modules require that the entry chunk (e.g. the first script loaded by the <script> tag) be defined with specific properties, such as define and require which is typically provided by RequireJS or any compatible loaders (such as almond). Otherwise, loading the resulting AMD bundle directly will result in an error like define is not defined.

So, with the following configuration...

output: {
  library: "MyLibrary",
  libraryTarget: "amd"
}

The generated output will be defined with the name "MyLibrary", i.e.

define("MyLibrary", [], function() {
  // This module return value is what your entry chunk returns
});

The bundle can be included as part of a script tag, and the bundle can be invoked like so:

require(['MyLibrary'], function(MyLibrary) {
  // Do something with the library...
});

If output.library is undefined, the following is generated instead.

define([], function() {
  // This module returns is what your entry chunk returns
});

This bundle will not work as expected, or not work at all (in the case of the almond loader) if loaded directly with a <script> tag. It will only work through a RequireJS compatible asynchronous module loader through the actual path to that file, so in this case, the output.path and output.filename may become important for this particular setup if these are exposed directly on the server.

libraryTarget: "umd" - This exposes your library under all the module definitions, allowing it to work with CommonJS, AMD and as global variable. Take a look at the UMD Repository to learn more.

In this case, you need the library property to name your module:

output: {
  library: "MyLibrary",
  libraryTarget: "umd"
}

And finally the output is:

(function webpackUniversalModuleDefinition(root, factory) {
  if(typeof exports === 'object' && typeof module === 'object')
    module.exports = factory();
  else if(typeof define === 'function' && define.amd)
    define([], factory);
  else if(typeof exports === 'object')
    exports["MyLibrary"] = factory();
  else
    root["MyLibrary"] = factory();
})(this, function() {
  //what this module returns is what your entry chunk returns
});

Note that omitting library will result in the assignment of all properties returned by the entry point be assigned directly to the root object, as documented under the object assignment section. Example:

output: {
  libraryTarget: "umd"
}

The output will be:

(function webpackUniversalModuleDefinition(root, factory) {
  if(typeof exports === 'object' && typeof module === 'object')
    module.exports = factory();
  else if(typeof define === 'function' && define.amd)
    define([], factory);
  else {
    var a = factory();
    for(var i in a) (typeof exports === 'object' ? exports : root)[i] = a[i];
  }
})(this, function() {
  //what this module returns is what your entry chunk returns
});

Since webpack 3.1.0, you may specify an object for library for differing names per targets:

output: {
  library: {
    root: "MyLibrary",
    amd: "my-library",
    commonjs: "my-common-library"
  },
  libraryTarget: "umd"
}

Module proof library.

Other Targets

libraryTarget: "jsonp" - This will wrap the return value of your entry point into a jsonp wrapper.

MyLibrary(_entry_return_);

The dependencies for your library will be defined by the externals config.

output.path

string

The output directory as an absolute path.

path: path.resolve(__dirname, 'dist/assets')

Note that [hash] in this parameter will be replaced with an hash of the compilation. See the Caching guide for details.

output.pathinfo

boolean

Tell webpack to include comments in bundles with information about the contained modules. This option defaults to false and should not be used in production, but it's very useful in development when reading the generated code.

pathinfo: true

Note it also adds some info about tree shaking to the generated bundle.

output.publicPath

string

This is an important option when using on-demand-loading or loading external resources like images, files, etc. If an incorrect value is specified you'll receive 404 errors while loading these resources.

This option specifies the public URL of the output directory when referenced in a browser. A relative URL is resolved relative to the HTML page (or <base> tag). Server-relative URLs, protocol-relative URLs or absolute URLs are also possible and sometimes required, i. e. when hosting assets on a CDN.

The value of the option is prefixed to every URL created by the runtime or loaders. Because of this the value of this option ends with / in most cases.

The default value is an empty string "".

Simple rule: The URL of your output.path from the view of the HTML page.

path: path.resolve(__dirname, "public/assets"),
publicPath: "https://cdn.example.com/assets/"

For this configuration:

publicPath: "/assets/",
chunkFilename: "[id].chunk.js"

A request to a chunk will look like /assets/4.chunk.js.

A loader outputting HTML might emit something like this:

<link href="/assets/spinner.gif" />

or when loading an image in CSS:

background-image: url(/assets/spinner.gif);

The webpack-dev-server also takes a hint from publicPath, using it to determine where to serve the output files from.

Note that [hash] in this parameter will be replaced with an hash of the compilation. See the Caching guide for details.

Examples:

publicPath: "https://cdn.example.com/assets/", // CDN (always HTTPS)
publicPath: "//cdn.example.com/assets/", // CDN (same protocol)
publicPath: "/assets/", // server-relative
publicPath: "assets/", // relative to HTML page
publicPath: "../assets/", // relative to HTML page
publicPath: "", // relative to HTML page (same directory)

In cases where the publicPath of output files can't be known at compile time, it can be left blank and set dynamically at runtime in the entry file using the free variable __webpack_public_path__.

 __webpack_public_path__ = myRuntimePublicPath

// rest of your application entry

See this discussion for more information on __webpack_public_path__.

output.sourceMapFilename

string

This option is only used when devtool uses a SourceMap option which writes an output file.

Configure how source maps are named. By default "[file].map" is used.

The [name], [id], [hash] and [chunkhash] substitutions from #output-filename can be used. In addition to those, you can use substitutions listed below. The [file] placeholder is replaced with the filename of the original file. We recommend only using the [file] placeholder, as the other placeholders won't work when generating SourceMaps for non-chunk files.

output.sourcePrefix

string

Change the prefix for each line in the output bundles.

sourcePrefix: "\t"

Note by default an empty string is used. Using some kind of indentation makes bundles look more pretty, but will cause issues with multi-line strings.

There is no need to change it.

output.strictModuleExceptionHandling

boolean

Tell webpack to remove a module from the module instance cache (require.cache) if it throws an exception when it is required.

It defaults to false for performance reasons.

When set to false, the module is not removed from cache, which results in the exception getting thrown only on the first require call (making it incompatible with node.js).

For instance, consider module.js:

throw new Error("error");

With strictModuleExceptionHandling set to false, only the first require throws an exception:

// with strictModuleExceptionHandling = false
require("module") // <- throws
require("module") // <- doesn't throw

Instead, with strictModuleExceptionHandling set to true, all requires of this module throw an exception:

// with strictModuleExceptionHandling = true
require("module") // <- throws
require("module") // <- also throw

output.umdNamedDefine

boolean

When using libraryTarget: "umd", setting:

umdNamedDefine: true

will name the AMD module of the UMD build. Otherwise an anonymous define is used.

Contributors

dhurlburtusa fvgs irth mattce skipjack sokra tomasAlabes